KRAMER ELECTRONICS LTD. USER MANUAL MODEL: WP-501 Wall Plate Solution for Simple Room Control and Signal Switching P/N: 2900-000753 Rev 1
8 WP-501 - Using Your WP-501 5.1 Set the WP-501 Before installing the front panel and mounting it on the wall, you need to setup the WP-501. This
WP-501 - Using Your WP-501 9 9 5.2 Connecting the WP-501 To connect the WP-501, as illustrated in the example in Figure 5 (front panel) and Figure
10 WP-501 - Using Your WP-501 3. On the rear panel, connect the display device (for example, a projector) as follows. Connect the: VGA (PC) OUT
WP-501 - Using Your WP-501 11 11 5.2.1 Connecting the Microphone You can connect either a dynamic or a condenser microphone to the MIC IN 3.5mm mi
12 WP-501 - Technical Specifications 6 Technical Specifications INPUTS: 1 composite video (1Vpp/75Ω) on 2-pin terminal block connectors 1 unbalan
WP-501 - Technical Specifications 13 13 LIMITED WARRANTYWHO IS PROTECTED?WHAT IS COVERED AND WHAT IS NOT COVEREDWHAT WE WILL PAY FOR AND WHAT WE WI
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We
WP-501 – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 4 Defining the WP-501
WP-501 - Introduction 1 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creat
2 WP-501 - Getting Started 2 Getting Started This user manual is written for the end user. Refer to the separate Kramer K-Config Guide (availabl
WP-501 - Overview 3 3 3 Overview The WP-501 is an all-in-one AV solution for classrooms, training rooms and similar simple AV installations. It en
4 WP-501 - Defining the WP-501 4 Defining the WP-501 This section defines the WP-501. Figure 1: WP-501 Front Panel # Feature Function 1 VOLUME
WP-501 - Defining the WP-501 5 5 Figure 2: WP-501 Rear Panel # Feature Function 1 IR OUT Controls the display device via an IR emitter (for ex
6 WP-501 - Defining the WP-501 4.1 Grounding the WP-501 The grounding screw is used to earth the chassis of the unit to the building ground preven
WP-501 - Using Your WP-501 7 7 5 Using Your WP-501 This user manual is applicable once the unit is installed and configured by authorized Kramer t
Comments to this Manuals