Kramer Electronics VS-801USB User Manual download pdf (Page 19)

16 VS-801USB - Protocol 3000

10 Protocol 3000

The VS-801USB can be operated using serial commands from a PC, remote

controller or touch screen using the Kramer Protocol 3000.

This section describes:

• Kramer Protocol 3000 syntax (see Section

10.1)

• Kramer Protocol 3000 commands (see Section

10.2)

10.1 Kramer Protocol 3000 Syntax

10.1.1 Host Message Format

Start Address (optional) Body Delimiter

Destination_id@

Message

10.1.1.1 Simple Command

Command string with only one command without addressing:

Start Body Delimiter

Command SP Parameter_1,Parameter_2,… CR

10.1.1.2 Command String

Formal syntax with commands concatenation and addressing:

Start Address Body Delimiter

Destination_id@

Command_1 Parameter1_1,Parameter1_2,…|

Command_2 Parameter2_1,Parameter2_2,…|

Command_3 Parameter3_1,Parameter3_2,…|…

10.1.2 Device Message Format

Start Address (optional) Body delimiter

Sender_id@

Message

CR LF

10.1.2.1 Device Long Response

Echoing command:

Start Address (optional) Body Delimiter

Sender_id@

Command SP [Param1 ,Param2 …] result CR LF

CR = Carriage return (ASCII 13 = 0x0D)

LF = Line feed (ASCII 10 = 0x0A)

SP = Space (ASCII 32 = 0x20)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

No comments

Kramer Electronics VS-801USB User Manual Page 19