Kramer-electronics VP-728 User Manual download pdf (Page 26)

VP-728 - Configuring the VP-728 via the OSD MENU Screens 21

7 Configuring the VP-728 via the OSD MENU

Screens

The VP-728 uses an on-screen display (OSD) menu for system configuration. The

menu appears as an overlay over any images that are output from the VP-728.

There are eight sub-menus that are used to configure the VP-728. You can activate

and navigate these menus from the front panel buttons, or from the IR remote

control.

Figure 9: MENU Items

To access and use the OSD menus, push the button for the desired input signal,

then press the MENU front panel OSD button or the MENU key on the infrared

remote control transmitter to display the main MENU screen which shows the eight

interactive icons.

• Press the  or  buttons to select the desired sub-menu, and then press

ENTER

• Press the  or  buttons to select the menu item to be adjusted, and then

press ENTER

• Press the  or  buttons to make the adjustment and then press ENTER, or

• Press the  or  buttons to increase or decrease the (numerical) value as

needed

To return to the previous menu level, press the front panel MENU button or the

MENU key on the remote control. All settings and adjustments are automatically

saved in non-volatile memory for each of the inputs (except USB).

The values defined in the different menus may change according to the

firmware version (you can download the up-to-date firmware version

from our Web site at http://www.kramerelectronics.com

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 68 69

No comments

Kramer-electronics VP-728 User Manual Page 26