Kramer Electronics 7508 User Manual download pdf (Page 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Using Your 7508 CV/YC to SDI Converter

5.2 Setting the DIP-Switches

Configure the 7508 unit by setting the DIP-switches, as shown in

Table 2

and

Figure 5.

Table 2: Setting the DIP-Switches

DIP-Switch

Set as Follows:

1 Y/C ON for Y/C source; OFF for CV source

2 RESERVED OFF

3 PEDESTAL

ON for pedestal (7.5 IRE offset selection for NTSC); OFF for no pedestal

AUTO NTSC PAL PAL-M PAL-N NTSC-4 SECAM AUTO

4 STANDARD 1 OFF ON OFF ON OFF ON OFF ON

5 STANDARD 2 OFF OFF ON ON OFF OFF ON ON

6 STANDARD 3 OFF OFF OFF OFF ON ON ON ON

7 RESERVED OFF

8 PROGRAM ON for upgrading firmware; OFF for normal use

Figure 5: DIP-Switch Settings

1 NTSC offsets the black level within the active video signal by 7.5 IRE when selected

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

No comments

Kramer Electronics 7508 User Manual Page 10