Kramer Electronics VP-425 User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 17
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
10 VP-425 - Controlling the VP-425
5.2.1 The MAIN MENU
Mode
Function
PICTURE See Section 5.2.2
ASPECT RATIO Full, 16:9, 4:3, BEST FIT
OVER SCANNING Off, 5%, 10%, 15%, 20%
NOISE REDUCTION Off, Min, Typ, Max
OUTPUT Select the output resolution from the menu (default 720p):
Output resolution: Appears as: Output resolution: Appears as:
480p 480P SXGA 1280x1024
576p 576P WXGA 1360x768
720p 720P 1400x1050 1400x1050
1080i 1080I WSXGA 1440x900
1080p 1080P UXGA 1600x1200
VGA 640x480 1680x1050 1680x1050
SVGA 800x600 WUXGA 1920x1200
XGA 1024x768 Native
1280x800 1280x800
NATIVE - Select NATIVE to select the output resolution from the EDID of
the connected HDMI monitor
REFRESH RATE Select the output refresh rate: FOLLOW, 50Hz, 60Hz
HD OUTPUT COLOR Select the HD output colorspace: RGB, YPbPr
OSD SETTINGS Set the OSD parameters: H Position, V Position, Transparency,
Timeout and Display (see Section
5.2.3)
ADVANCED
AUTO SYNC-OFF - Turn the auto sync ON/OFF. When ON, this
deactivates the output after a few minutes if no input is present, until
a valid input is again detected or any button is pressed.
This is useful, for example, when the output is connected to a projector,
and the projector will automatically shut down when it has no input
H OFFSETadjust the picture H position
V OFFSETadjust the picture V position
FREEZE set the function of the FREEZE button: FREEZE + MUTE,
MUTE ONLY, FREEZE ONLY
FACTORY DEFAULT Resets to the default parameters
If you cannot see the display after factory reset, use the front panel buttons
to set the correct resolution:
To reset to XGA, press the FREEZE (+) and ENTER buttons
simultaneously for about 2 seconds
To reset to 720p press the – and MENU buttons simultaneously for about 2
seconds
INFORMATION Displays the input and output resolution (via the INFO display) the
SINK connector type and model, the native resolutions and the
software version
EXIT Select to exit the menu
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments