Kramer Electronics VM-22HD User Manual download pdf (Page 7)

Connecting the VM-22HD 2 x 1:2 HD/SD-SDI DA

5 Connecting the VM-22HD 2 x 1:2 HD/SD-SDI DA

This section describes how to connect the VM-22HD in single link mode

(see section 5.1

) and in dual link mode (see section 5.2).

5.1 Connecting the VM-22HD in the Single Link Mode

connect the VM-22HD, as shown in the example in Figure 2

, do the

following

1. Connect one or two HD-SDI/SD-SDI video sources (for example, cameras)

to the INPUT A and/or B BNC connectors.

2. Connect up to

four video OUTPUT BNC connectors to the appropriate

HD-SDI/SD-SDI video acceptors (for example, displays).

3. Connect the 12V DC power adapter to the power socket and connect the

adapter to the mains electricity (not shown in Figure 2

The VM-22HD operates as soon as it is connected and powered on.

Figure 2: Connecting the VM-22HD in Single Link Mode

1 Switch OFF the power on each device before connecting it to your VM-22HD. After connecting your VM-22HD, switch on

its power and then switch on the power on each device

2 You do not have to connect all outputs

1 2 3 4 5 6 7 8 9 10 11

No comments

Kramer Electronics VM-22HD User Manual Page 7