Kramer Electronics VP-81SIDN User Manual download pdf (Page 47)

VP-81SIDN - Protocol 3000

13.1.4 Entering Commands

You can directly enter all commands using a terminal with ASCII communications

software, such as HyperTerminal, Hercules, etc. Connect the terminal to the serial

or Ethernet port on the Kramer device. To enter CR press the Enter key.

( LF is also sent but is ignored by command parser).

For commands sent from some non-Kramer controllers like Crestron, some

characters require special coding (such as, /X##). Refer to the controller manual.

13.1.5 Command Forms

Some commands have short name syntax in addition to long name syntax to allow

faster typing. The response is always in long syntax.

13.1.6 Chaining Commands

Multiple commands can be chained in the same string. Each command is

delimited by a pipe character (“|”). When chaining commands, enter the message

starting character and the message closing character only once, at the

beginning of the string and at the end.

Commands in the string do not execute until the closing character is entered.

A separate response is sent for every command in the chain.

13.1.7 Maximum String Length

64 characters

13.2 Kramer Protocol 3000 Commands

Command

Parameters

Description

Protocol handshaking

MODEL?

Read device model

VERSION?

Read device firmware version

SN?

Read device serial number

NAME?

Get device name

MACH-NUM

Set the machine num

BUILD-DATE?

Read device build date

PROT-VER?

Read device protocol version

HELP

List of commands

RESET

Reset device

1 2 ... 42 43 44 45 46 47 48 49 50

Comments to this Manuals

No comments

Kramer Electronics VP-81SIDN User Manual Page 47

Comments to this Manuals

Related products and manuals for Video switches Kramer Electronics VP-81SIDN