Kramer Electronics TP-330FW User Manual download pdf (Page 9)

Wiring the TP LINE IN/LINE OUT RJ-45 Connectors

On both TP-330FW units:

 The ON LEDs light green indicating that they are receiving power

—and—

 The CAT 5 LINK LEDs light green indicating that a CAT 5 link has been

established between the units

Notes:

• You can connect two FireWire devices simultaneously to a TP-330FW,

however, only one device can be active at a time

• There is no need to install the Kramer PT-1FW DV Line Protector on the

STP/UTP as the TP-330FW already contains built-in line protection

• You can connect devices with 1394b (FireWire 800) bilingual interfaces at

speeds of up to 400Mbps. The FireWire cable used must have a bilingual

connector on one side and a 1394a 6-pin connector on the other side

6 Wiring the TP LINE IN/LINE OUT RJ-45 Connectors

Table 2

and Figure 3 define the TP RJ-45 wiring that is different to the standard

EIA/TIA 568B wiring. When using STP cable, connect/solder the cable shield to

the RJ-45 connector shield.

Table 2: Twisted Pair Cable Wiring

PIN Wire Color PIN

1 Green/White 7

2 Green 8

3 Orange/White 3

4 Blue 4

5 Blue/White 5

6 Orange 6

7 Brown/White 1

8 Brown 2

81 2

5 7

8632

Figure 3: UTP Connector

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Kramer Electronics TP-330FW User Manual Page 9