Kramer Electronics VP-725NA User Manual download pdf (Page 35)

30 VP-725NA - Configuring and Controlling the VP-725NA

7.1.1 The Input Screen

Figure 14 defines the Input screen.

Figure 14: Input Screen

Input Screen

Setting Function Default

Select Select the group: Video Group, Scaler Scaler

VGA Group Select the VGA input: From 1 to 4

In the Video Group operation mode

VGA 1

HDMI Group Select the HDMI input: From 1 to 4 HDMI 1

Comp Group Select the Comp input: From 1 to 4 Comp 1

YC Group Select the YC input: From 1 to 4 YC 1

CV Group Select the CV input: From 1 to 4 CV 1

Scaler Select the source to scale (in the Scaler operation mode): From

VGA 1 to VGA 4; from HDMI 1 to HDMI 4; from COMP 1 to COMP

4; from YC 1 to YC 4; from CV 1 to CV 4, and USB

VGA 1

Image Name Shows the file name that is displayed when the USB port is connected

Supports JPEG format only. The JPEG file should not exceed a

resolution of 2048x1536. If the image file is not within the definition a

blank screen appears and the machine displays the message: "File too

big" or "File too small" (smaller than 320x240)

Color Format Select the color format: Auto, RGB or YUV Auto

Video

Standard

Select the video standard: Auto, NTSC, PAL, PAL-M, PAL-N, NTSC

4.43, SECAM or PAL-60

H-Position Set the horizontal position (For UXGA and component video inputs):

The range changes according to the input mode

Auto

V-Position Set the vertical position: The range changes according to the input

mode

Frequency Adjust the frequency (for the UXGA inputs): The range changes

according to the input mode

Phase Adjust the phase: 0 to 31 0

Auto image Assesses the image and improves the quality accordingly, by

automatically adjusting the phase, frequency and position. Upon

completion, the relevant OSD values are updated (Hpos, Vpos,

Phase and Frequency)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 72 73

No comments

Kramer Electronics VP-725NA User Manual Page 35