Kramer Electronics VP-725NA User Manual download pdf (Page 43)

38 VP-725NA - Configuring and Controlling the VP-725NA

7.1.4 The Geometry Screen

Figure 20 defines the Geometry screen, allowing the user flexibility in positioning

his projector relative to the screening surface.

Figure 20: Geometry Screen

Geometry Screen

Setting Function Default

Application Select the output application: Keystone, Anyplace or

Rotation

Keystone

Location Select the location of the display: Front, Ceiling, Rear or

Rear ceiling

Front

Horizontal

Keystone

Adjust the horizontal keystone: -40 to 40

If the projector is located at an angle to the left or right of the

screen

Vertical Keystone Adjust the vertical keystone: -30 to 30

If the projector is located at an angle above or below the screen

Diagonal

Projection

Move the location of each corner of the display separately,

horizontally and vertically: Top Left, Top Right, Bottom Left,

Bottom Right or Reset (to reset diagonal projections

settings)

Top Left

Pincushion/Barrel Adjust the pincushion or barrel appearance of the screen: -

20 to 20

For projection onto curved surfaces

Rotation Rotate the display clockwise or counterclockwise (in 1°

increments):

-180 to 180

Reset all Resets the geometry settings to their default values

Available settings for each application are listed here:

Application Available Settings

Keystone Location, horizontal keystone, vertical keystone, pincushion/barrel and

Reset all

Anyplace Location, Diagonal Projection and Reset all

Rotation Location, pincushion/barrel, Rotation and Reset all

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 72 73

No comments

Kramer Electronics VP-725NA User Manual Page 43