VM-114H2C - Connecting the VM-114H2C
4 Connecting the VM-114H2C
Always switch off the power to each device before connecting it to your
VM-114H2C. After connecting your VM-114H2C, connect its power
and then switch on the power to each device.
To connect the VM-114H2C as illustrated in the example in Figure 2:
1. Connect the HDMI source (for example, a DVD player) to the IN 1 (HDMI)
connector.
2. Connect the TP source, for example, a PT-571 HDMI Line Transmitter
(another example is the TP-573), another VM-114H2C or a VM-114H4C to
the IN 2 (CAT5) connector.
3. Connect the HDMI OUT connectors to up to two HDMI acceptors, for
example, LCD TV or plasma displays
4. Connect the TP RJ-45 output connectors to up to two TP acceptors, for
example, the PT-572+ HDMI Line Receiver (another example is the TP-574),
the VM-114H or the VM-114H4C.
5. Optional—Plug the remote IR sensor into the front panel remote IR 3.5mm
mini jack.
6. Optional—Connect a PC via RS-232 to the RS-232 port on the VM-114H2C
(see Section 4.1).
7. Connect the power adapter to the power socket on the VM-114H2C and to
the mains electricity (not shown in Figure 2).
8. Optional—Press the EDID READ button to acquire or change the EDID
information (see Section 5.1).
Comments to this Manuals