Kramer Electronics VP-88K User Manual download pdf (Page 22)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating the VP-88K

7 Operating the VP-88K

You can operate the VP-88K via the following methods:

• Front panel buttons

• RS-232

• RS-485 serial commands transmitted by a touch screen system, PC, or other

serial controller

• Ethernet

• The Kramer RC-IR3 Infra-Red Remote Control Transmitter

7.1 Displaying the Configuration of the VP-88K

For five seconds after being powered on, the unit’s model and software version is

displayed (see

Section 7.4.1

After the first five seconds, the 7-segment display

shows which audio

or video

input is switched to which output (see

Section 7.4.2

7.2 Switching Outputs to Inputs

To switch a video/audio input to an output:

• Press the desired OUTPUT button, followed by the desired INPUT button.

To connect a video/audio input to all outputs:

• Press the ALL button followed by the INPUT button corresponding to the

input that is to be routed to all the outputs

To disconnect a video/audio input from a specific output:

• Press the desired OUTPUT button followed by the OFF button.

To disconnect all outputs:

• Press the ALL button, followed by the OFF button

7.3 Confirming Settings

You can choose to work in the At Once or the Confirm mode. When the VP-88K

operates in the At Once mode, pressing an output-input combination implements

the action immediately. In the Confirm mode, the TAKE button must be pressed to

activate the switch.

The At Once Mode

In the At Once mode, execution is immediate and actions require no user

confirmation. However, no protection is offered against changing an action in error.

1 Item 6 in Table 1

2 When the Audio button lights, that is, when the audio breakaway mode is selected

3 When the Video button lights, that is, when the video breakaway mode is selected

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

No comments

Kramer Electronics VP-88K User Manual Page 22