Kramer-electronics VS-66HN User Manual download pdf (Page 12)

VS-66HN - Connecting the VS-66HN 6x6 HDMI Matrix Switcher

5 Connecting the VS-66HN 6x6 HDMI Matrix

Switcher

Always switch off the power to each device before connecting it to your

VS-66HN. After connecting your VS-66HN, connect its power and then

switch on the power to each device.

To connect the VS-66HN 6x6 HDMI Matrix Switcher as illustrated in the

example in Figure 3:

1. Connect up to six HDMI sources (for example, DVD players) to the IN HDMI

connectors.

You do not have to connect all the sources.

2. Connect the six OUT HDMI connectors to up to six HDMI acceptors (for

example, LCD displays with built-in speakers).

You do not have to connect all the outputs.

3. If required, connect a PC/controller to the RS-232 port (see Section 6.6)

and/or the Ethernet port (see Section 6.7).

4. Connect the device to the mains electricity (not shown in Figure 3).

5. If necessary, acquire the EDID (see Section 6.2)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Kramer-electronics VS-66HN User Manual Page 12