Kramer Electronics VP-88K User Manual download pdf (Page 9)

Defining the RGBHV/Balanced Audio Matrix Switcher

Table 1: VP-88K RGBHV/Balanced Audio Matrix Switcher Front Panel Features

# Feature Function

1 IR Receiver LED Lights yellow LED when receiving signals from the Kramer infra-red

remote control transmitter

2 POWER LED Lights red when the unit is turned on

3 OUTPUT SELECTOR

buttons

Select the output to which the input is switched

4 INPUT SELECTOR buttons Select the input to switch to the output (see Section 7.2

)

TAKE button Press to toggle between the Confirm mode

and the At Once mode

(see

Section 7.3

)

INPUT-OUTPUT STATUS

display

Displays the selected input switched to the output (marked above

each input)

7 LOCK button Locks the front panel buttons

8 AUDIO LEVEL + button Press to increase the input or output audio signal level

– button Press to decrease the input or output audio signal level

9 AFV Button When pressed

, actions relate to the video and audio channels. The

audio channels follow the video channels

AUDIO Button When pressed and the button is lit, subsequent actions relate to

audio functions

11 VIDEO Button When pressed and the button is lit, subsequent actions relate to video

functions

12 RCL Button Recalls a setup from the non-volatile memory. Press the RCL button

followed by an OUTPUT (1-8) or INPUT (9-16) button

STO Button Stores the current settings in non-volatile memory. Press the STO

button followed by an OUTPUT (1-8) or INPUT (9-16) button

14 OFF Button An OFF-OUTPUT combination disconnects that output from the

inputs; an OFF-ALL combination disconnects all the outputs

15 ALL Button Press ALL followed by an INPUT button to connect that input to all

the outputs

1 When in the Confirm mode, the TAKE button lights

2 The button lights

3 In this case the INPUT or OUTPUT button corresponds to the setup address number

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

No comments

Kramer Electronics VP-88K User Manual Page 9