Kramer Electronics VP-88K User Manual download pdf (Page 14)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting the RGBHV/Balanced Audio Matrix Switcher

5. Set the RS-485 termination and Machine number (see Section 6.5

6. If required, connect a PC and/or controller to the:

 RS-232 port and/or

 RS-485 port and/or

 Ethernet connector

7. Connect the power cord17F

Note that you can use the VP-88K18F

• For various video applications (other than RGB), such as, composite video,

Y/C (s-Video), YUV (component video), and even SD – SDI signals (Serial

Digital Video) on different inputs

• For parallel applications, for example, you can use it simultaneously as a

composite video 8x8 matrix and as a Y/C (s-Video) Matrix

19F

• In mixed applications (such as Y/C and CV simultaneously). To do so, select

the parallel output channels for the same format, for example, if the Red and

Green Channels are used for Y/C (the Red for “Y” and the Green for “C”) then

the output channels should be used similarly (Red for “Y” and Green for “C”)

20F

6.1 Wiring a Balanced/Unbalanced Stereo Audio Input/Output

UFigure 4U illustrates how to wire a balanced input/output connection.

Figure 4: Wiring a Balanced Stereo Audio Input/Output

UFigure 5U illustrates how to wire an unbalanced acceptor to the balanced output of

the unit.

1 Not illustrated in Figure 3

2 Including the RGB connectors but not the HV connectors

3 For example, the Red channel is used for composite video and Green and Blue channels are used for s-Video

4 In a mixed signal application all the input channels are selected simultaneously. For example, if used for Y/C and CV parallel

switching, then when input number 1 is selected, it selects both input number 1 of the Y/C and input number 1 of the CV channel

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

No comments

Kramer Electronics VP-88K User Manual Page 14